ERMIONE
About This Project
The ERMIONE R presses have been studied for the compression molding of rubber items such as gaskets – gaskets heat exchangers – rubber plates. They are presses with a monolithic frame structure with downward movement of the movable platen.
The ERMIONE R presses can be equipped with:
T – Bottom sliding platen
TT – Double sliding bed plate
V – Vacuum chamber
TR – Transfer
DD – Double Deck M – Electromagnetic platen
ST – Safety system
LAN – LAN connection to Intranet
Presses designed for compression molding of rubber items such as gaskets – heat exchanger gasket – sheets.
Clamping force (nK / US tons)
| 1500/165 | 2000/220 | 3000/331 | 4000/441 | 5000/551 | 5000/551 | 8000/882 | 8000/882 | 10000/1102 | 10000/1102 |
Stroke (mm / inch)
| 400/15,7 | 500/19,7 | 700/27,5 | 800/31,5 | 800/31,5 | 800/31,5 | 1000/39,3 | 1000/39,3 | 1000/39,3 | 1200/47,2 |
Daylight (mm / inch)
| 400/15,7 | 500/19,7 | 700/27,5 | 800/31,5 | 800/31,5 | 800/31,5 | 1000/39,3 | 1000/39,3 | 1000/39,3 | 1200/47,2 |
Dimension of hot platen (mm)
| 400×400 | 500×500 | 600×600 | 700×700 | 800×800 | 800×1600 | 900×900 | 900×1800 | 1100×1100 | 1100×2200 |
DESIGN
frame
PLATE MOVEMENT
downward
CLAMPING FORCE
from 1.500 to 10.000 kN / from 165 to 1102 US tons
DIMENSION OF HOT PLATEN
from 400 x 400 mm to 1.100 x 2.200 mm
STROKE & LIGHT
from 400 to 1.200 mm – from 15,7 to 47,2 inch
MAX TEMPERATURE
standard 240 °C
PRECISION
standard ± 5 °C, with 3 zone ± 3 °C